Commercial Air Conditioning Maintenance: What a Service Covers and How Often You Need One
In a commercial building, the air con rarely packs up without warning. A filter clogs. A drain line backs up. Refrigerant seeps out over months, then the first hot week arrives, the system can't cope, and what should have been a routine service is now an emergency callout.
Catching that stuff early is the whole point of commercial air conditioning maintenance. This guide walks through what a proper service involves and how often your systems need one. We'll also cover which bits the law actually requires and which are just good practice.
What a commercial air conditioning service covers
A service is more than a filter swap. On a planned visit our engineers work through the whole system.
That normally includes:
- Filters cleaned or replaced
- Coil cleaning and system hygiene checks
- Refrigerant checks and leak testing. If a leak turns up, it gets repaired. Under F-Gas rules that's a legal duty, not an optional extra
- Testing fans, motors and airflow
- Checking the system is delivering the temperatures it should
- Electrical and safety checks
- Drainage and condensate checks
- A written report with maintenance recommendations
People undervalue the report. It's your record of each unit's condition. On a multi-site portfolio it's also how you see which systems are fine and which are running on borrowed time.
How often should commercial air conditioning be serviced?
Honestly, it varies. It depends on the system, how hard it works and what it's protecting.
Annual maintenance is the baseline on our HVAC programmes. From there the schedule is built around the site itself: seasonal demand, hours of operation, the type of equipment and what the manufacturer recommends. A shop open seven days a week isn't the same job as an office used nine to five, and a server room is different again. That's why one schedule doesn't fit every building.
Where the manufacturer sets out its own servicing requirements, those get built into the programme too.
The legal side: F-Gas leak checks and TM44 inspections
Two separate obligations sit alongside servicing. They get mixed up a lot.
F-Gas. The refrigerant in many AC systems is a fluorinated gas. In Great Britain, once a system holds 5 tonnes of CO2 equivalent or more, it has to be leak checked by certified personnel at set intervals. Bigger charge, more frequent checks. Fit an automatic leak detection system and the interval doubles.
| Refrigerant charge (CO2 equivalent) | Equivalent R410A charge | Leak check at least every | With leak detection fitted |
|---|---|---|---|
| 5 to under 50 tonnes | 2.4kg | 12 months | 24 months |
| 50 to under 500 tonnes | 24kg | 6 months | 12 months |
| 500 tonnes or more | 240kg | 3 months | 6 months (leak detection is mandatory at this level) |
Hermetically sealed systems holding less than 10 tonnes of CO2 equivalent are exempt. Records of the charge and every leak check have to be kept. Our F-Gas guide covers the detail.
TM44. This one applies in England and Wales. If the air conditioning units you control in a building add up to more than 12kW of effective rated output, they count as one system, and an accredited energy assessor has to inspect it at least once every five years. It's the total that counts. A handful of small units can tip you over 12kW without any single one coming close. The first inspection is due within five years of the system going into service. This is an efficiency inspection. It won't fix anything. What you get is a report with recommendations for improving the system's performance.
Neither one replaces a service. A system can pass a leak check and still have blocked drains and filthy coils.
Signs your system needs attention before the next visit
Faults our engineers get called out to include gas leaks, sensor faults and pressure problems. Compressors, condensers and fans fail. Electrical and control issues come up too. Plenty of these get picked up on a planned service before they turn into a callout, which is the whole point of having one.
If cooling drops off or a unit starts behaving differently, get it looked at rather than waiting for the next scheduled visit.
Planned maintenance vs waiting for a breakdown
Reactive repairs will always have a place. Things fail. When air conditioning goes down it hits comfort and staff wellbeing, and anything temperature-sensitive is at risk. Where a repair is on the cards, we'll give you an honest view on whether fixing or replacing makes more sense long term.
Regular planned visits make a breakdown less likely. Units tend to last longer and run more efficiently. Cleaner air for staff and customers too.
Not every AC fault starts with the AC, either. A leaking indoor unit might be a drainage issue. A unit that keeps tripping could be electrical. Because TMS covers electrical, drainage and building fabric work as well, a linked problem goes straight to the right team. No second contractor needed.
How TMS handles commercial air conditioning maintenance
TMS is a family-run facilities management provider, working since 2007 from our base in Alcester. We support commercial sites across the UK and Ireland through a network of more than 1,000 vetted specialists, with one contact and one contract covering the lot.
Maintenance programmes are built around your building's usage, the equipment on site and the manufacturer's recommendations. All refrigerant handling and leak testing is carried out by F-Gas certified engineers. We work in retail parks, offices, warehouses, industrial sites and multi-site portfolios, often in live, occupied spaces where disruption has to be kept to a minimum.
You can find more on our commercial air conditioning services and our wider commercial HVAC services, including heating and ventilation maintenance.
Frequently asked questions
Is air conditioning servicing a legal requirement?
Some of it is. F-Gas leak checks are mandatory once a system is over the threshold. In England and Wales, TM44 inspections are too, where the units you control add up to more than 12kW. Planned servicing sits alongside both, keeping the system safe, efficient and compliant the rest of the time.
What's the difference between an AC service and a TM44 inspection?
A service is hands-on maintenance, with engineers on site cleaning and testing the kit and sorting minor faults there and then. TM44 is different. An accredited energy assessor inspects the accessible parts of the system and writes up recommendations for improving its performance. No work is done on the equipment.
Does commercial HVAC maintenance include heating?
It can. Our HVAC maintenance packages cover scheduled servicing of air conditioning and heating systems, plus ventilation inspections, all on one programme.
Can you look after air conditioning across several sites?
Yes. We manage maintenance for multi-site portfolios across the UK and Ireland, with centralised reporting so you can see the condition of every system in one place.
Who is responsible for F-Gas leak checks?
The operator of the equipment. Usually that's the business running the system, not the engineer doing the check. Renting the kit? It can shift. Depending on the rental agreement, the company you rent from may be the one responsible instead.
What happens if a leak is found during a check?
It has to be fixed. Leaving a known leak alone is a breach of the F-Gas rules, the same as skipping the checks altogether. Repairing it isn't the end of the job either, because the record of the check and the work done has to be kept.
Do several small air conditioning units count towards the 12kW TM44 threshold?
Yes, if you control them. Units in the same building under the same person's control are treated as one system for TM44, so their outputs are added together. Lots of small split units can bring a building into scope.
How often does an automatic leak detection system need checking?
Once a year in Great Britain, for refrigeration and air conditioning equipment. Fitting one doubles the gap allowed between leak checks. The detection system itself still needs its own annual check, though.
Are hermetically sealed air conditioning systems exempt from leak checks?
Below 10 tonnes of CO2 equivalent, yes, as long as the equipment is labelled as hermetically sealed. Above that figure, the normal leak-check intervals apply.
TMS supports businesses right across the UK and Ireland. Take a look at the areas we serve, or get in touch to talk through a maintenance programme for your site.